Common troubleshooting of self-cleaning filters

2022-12-09

The self-cleaning filter is mainly composed of stainless steel shell, stainless steel filter screen, stainless steel steel brush, control cabinet, drain valve, controller, sealing ring and other components. There will be malfunctions, if there is a self-cleaning water leak, what should be done. First, determine the leaking location. If there is water leaking at the connection between the upper head and the cylinder, first check whether the gasket is off, loosen the bolts, and check the gasket. Secondly, tighten the bolts diagonally and start again to see if the water leakage problem is solved. The second is water leakage at the shaft seal, you can contact us for a video inspection process. The third drain valve is leaking. First, turn off the power supply and use a wrench to close the drain valve to eliminate the problem that is not the valve itself. Second, use a wrench to open the drain valve to the maximum position to check whether there is a large impurity stuck.