Choose a high-flow cartridge filter housing, everything you want to know is here!

2023-09-26

The high-flow filter housing abandons the PP meltblown filter element used in the traditional filter and uses the high-flux filter element, which can 

produce up to 30m³/h of water per shipment. In terms of water flux, 1 40" high-flux filter element is equivalent to 20 PP meltblown filter elements, 

which means that the volume of high-flow security filters can be smaller and more compact, and replacing the filter element is easier and faster, and the

 operating cost is lower!

The high-flow security filter has high strength, high temperature resistance, and protects the filter element, and the folded surface design makes the 

pressure drop of the high-flux filter element lower than other filter elements, has a longer service life, and is more convenient and fast in the 

replacement process, and the cleanliness is higher.

High-flow filter housing selection table

Replacement element cost savings analysis

Liferite high-flow security filter, only need to place a 40-inch large-flux filter element to achieve the required flow, the equipment volume is only half of 

the ordinary security filter, the filter element installation is faster and more convenient, it takes about 3 minutes to install a filter element, more 

cost-saving.

Ordinary security filter needs to place 20 PP meltblown filter elements to achieve the required flow, the equipment volume is large, the replacement 

time of 20 filter elements is about 3 hours, the cost is high.

Related Products Recommendation

Reverse Osmosis Equipment

Ultrafiltration Equipment