PALL HCP600UY020H13 Equivalent Coreless High Flow Filter Cartridge

2026-10-19

Product Introduction

As an industrial high flow water filter, this cartridge is installed inside a large-flow water filter housing to capture suspended particles, sediment and fine impurities. It can be used together with a self-cleaning filter or pre-filter to build multi-stage protection for critical industrial water systems. The PALL HCP600UY020H13 equivalent cartridge is a 60-inch coreless high flow pleated filter element with 100% polypropylene gradient depth media and EPDM (H13) seals. Compared with standard 40-inch elements, its 60-inch longer length provides larger filtration area and higher single-cartridge treatment capacity. The equivalent replacement cartridge maintains the same overall dimensions, end connection style, inside-to-outside flow path and sealing interface. It can be installed into the existing filter housing without modification, helping users reduce procurement cost and shorten spare part delivery time while maintaining stable fine filtration performance.

Working Principle

The equivalent PALL HCP600UY020H13 cartridge uses inside-to-outside flow construction. Raw water or industrial liquid first enters the inner flow area of the cartridge, then passes outward through the gradient depth polypropylene media. Fine particles, suspended solids and colloidal impurities are trapped inside the progressive pore structure of the filter media, while clarified liquid flows out from the outer surface of the cartridge into the downstream system.

The coreless design helps reduce internal dead zones, while the extended 60-inch length increases effective filtration area and dirt holding capacity. When used with an upstream self-cleaning filter, larger particulate loads are removed in advance, helping stabilize differential pressure and extend cartridge service life.

Technical Specifications Table

Core Advantages

1. Direct Drop-in Replacement for PALL HCP600UY020H13

Same 60-inch length, 6-inch OD, end connection style, inside-to-outside flow path and EPDM sealing. No housing modification required.

2. Coreless Construction for Reduced Dead Zones

Without internal metal or plastic skeleton, the cartridge helps avoid residual contamination and dead flow areas, supporting cleaner operation in high-purity water applications.

3. 60-Inch Extended Length for Higher Flow Capacity

The longer 60-inch cartridge provides larger effective filtration area, higher dirt holding capacity and higher single-element treatment flow than shorter standard elements.

4. 0.2μm Absolute Filtration for Fine Particle Removal

Capable of capturing ultra-fine suspended particles and colloidal impurities, suitable for condensate polishing and high-purity water pretreatment.

5. EPDM Seal for Water Treatment and Weakly Corrosive Liquids

EPDM (H13) sealing material offers good compatibility with conventional water treatment liquids and weakly corrosive industrial fluids under normal operating conditions.

6. Compatible with Multi-Stage Filtration Systems

Can be used with upstream self-cleaning filters or pre-filters to remove coarse impurities first, reduce particulate load, stabilize differential pressure and extend cartridge life.

Application Scenarios

Power plant condensate polishing

Industrial high-purity water pretreatment

Large-flow RO prefiltration

Boiler feed water fine filtration

Steel mill process water treatment

Large-flow industrial liquid filtration